I called No.2 Sis last Sunday and asked her if I could borrow my drill. She graciously said yes.

Before she came over, I cleaned out the laundry room closet. I threw away a pair of shoes. I put two more pairs in a Goodwill bag with some jigsaw puzzles. And I recycled two bags of bags. That brings me to 299 bags, boxes, and small pieces of furniture I’ve gotten rid of since January of 2014.

Untitled design-3

When No.2 Sis arrived, I unpacked the two organizing widgets I’d purchased from Amazon. One was to hold the ironing board, and one was to hold the brooms, mops and dusters.

We decided to hang the broom holder first, because it looked more difficult. We held the broom holder up on the wall, and I drilled through each of the six mounting holes with a 1/16″ bit.

Then we put aside the broom widget and enlarged the holes to 1/8″. Hmm, too small for the drywall anchors. We tried 5/32″. Too small. 3/16″. Too small. I used every drill bit I owned. Finally, the largest bit gave us the proper-sized hole for the drywall anchors.

We installed the anchors, put the broom holder back up to the wall, and screwed in the six screws. Beautiful!

Ew, that broom needs a good hose-down.

Ew, that broom needs a good hose-down.

I hung the mop up. It slowly slid down to the floor. I hung the broom up. It also slid down to the floor. Damn it!

Well, at least the hooks would hold the dusters. On the contrary, the hooks were quite large, and the holes on some of the dusters were quite small.

I went to my trusty hardware bin, and pulled out some “S” hooks to adapt the dusters. Harumph! The “S” hooks were too small, too.

No.2 Sis noticed some plastic rings in the hardware bin. “What about these?” They were old plastic curtain rings.

The curtain rings were small enough to fit through the duster holes, and large enough to hang on the broom widget’s hooks. Unfortunately, they didn’t snap closed. A quick rummage through the kitchen junk drawer yielded some twist-ties, and I wired the curtain rings shut.

I hung the modified dusters on the hooks, hung the mop from another hook, and put the broom in upside-down so it couldn’t slide out of the holder. Beautiful!

I had to make it work. I damned well wasn’t going to try to get those six screws out after they were anchored into the drywall!

Sis and I figured the ironing board holder installation would be a piece a piece of cake after the broom holder experience.

laundry closet- ironing board widget

We held the ironing board holder on the wall, and I drilled two 1/8″ holes. Oops. The screws just popped into the holes with no resistance whatsoever.

Another rummage through the hardware bin, and we found two more drywall anchors and hammered them into the wall. The screws actually screwed in after that, so the ironing board hanger was securely mounted. Whew. I mean, beautiful!

PRODUCT REVIEWS:

I bought both hangers from Amazon.com. The broom hanger was:

$13.95
This got mixed, but mostly good reviews on Amazon. Some people did mention that their brooms and mops tended to slide out of the hanger’s grips. I should have read more of the reviews before I bought it. I wouldn’t recommend it.
The ironing board hanger was:
It would have been nice to have been told the drill size needed for the screws, but otherwise, good price for a good basic hanger. I’d recommend it.

Stay tuned…

p.s. The links included in this post are not affiliate links (I don’t get any commission if you click on them).

p.s.s. I shared this at Cozy Little House.